mainarticles   mainarticles
mainarticles
mainarticles   mainarticles
mainarticles
mainarticles

Home | Home & Family | Holidays


All About Homemade Hovercraft

By: Rashel Dan
 

When it comes to the design, there are almost more than a hundred available in the market today. Ranging from small hovercraft models to seriously built units that can stand long trips. Almost every hovercraft innovation can be simply acquired at a reasonable price. What's more interesting is that, even with its complex aero dynamic principle, you can still build your own vehicle at home.

With its different designs, its features and the principles by which these homemade hovercraft work, its not surprising to note why the hovercraft has become one of the best-loved hobbies today.

-Being an air cushioned vehicle, the homemade hovercraft is raised and lifted by a regulated pressure of air. Essentially, the air support underneath it acts as suspension similar to how wheels in an automobile are.

-The pressurized air also supports the weight of the entire hovercraft. This is logical. You cannot lift and balance the hovercraft if the air cushion cannot support the load of the platform and its additional loads.

-No matter the design or regardless of added features, hovercrafts all work on the same principle. And it's a simple principle in physics too.

-Hovercrafts are not boats but very low-flying aircraft vessels. They glide when there is a forward thrust. Its air dynamics closely follow those of an aircraft.

-For a simple homemade hovercraft, the minimum lift must not go lower than six (6) inches. This allowable air cushion height level is also dependent on the size of your hovercraft. For bigger vessels that are used to carry heavier loads, it is recommended that the cushion clearance be higher - not lower.

-Your homemade hovercraft weighs about the area of its bottom surface area against its air cushion. This means that your air cushion should be about the same weight of your hovercraft but in the form of air pressure. This equation concept creates the equilibrium required to stabilize the lift of your vehicle.

-For hovercrafts to work, it must have a skirt. The skirt is attached around the platform of the hovercraft hull. It's made of flexible material. It got its name because its cross-section plan design will appear to look like a girl's skirt. The skirt traps a great volume of air pressure and limits its release. This allows the hovercraft to rise.

-The person maneuvering the hovercraft is also called a pilot. This is because the vessel is technically an aircraft that glides on a smooth surface. Therefore it is not a boat or an automobile.

When you make your own hovercraft, you'll have more interesting facts to discover by yourself about the vehicle. Not mentioned here would be the joy in building the vessel by yourself. When it's done and ready to go, make sure to enjoy the ride as well. Steering and piloting the hovercraft is another unique and joyful experience.

Article Source: Main Articles

Do you want to make your own homemade hovercraft? All you require the right hovercraft plan.

This article may be reproduced wholly or in part without written permission provided the byline, resource area, and any hyperlinks remain in order to give proper credit to the author.

Internet search engines and directory listings are imperative to your sites existence and success. Submit Your Website to the Searchen Networks directory and search engine to achieve authoritive inbound links.

Please Rate this Article

 

Click the XML Icon Above to Receive Holidays Articles Via RSS!
mainarticles
Main Articles. All Rights Reserved. © 2005, 2006
Use of our service is protected by our Privacy Policy and Terms of Service.
mainarticles
 

Powered by Article Dashboard